There is a fairly wide variety of fasteners, which are actively used both in construction and in engineering. Of particular popularity threaded studs , as universal assistants in the combination of two or more details. Quite strong, they have a screw thread along the entire length, so that you do not have to compensate for the lack of the length of the screw part using the washers.
PLEASE in practice
Manufacturers produce a fairly large range of fixing parts to satisfy individual requests of different customers. As a rule, a steel rod is used as a basis that can withstand both static and dynamic loads. The universal mounting element is used in the following areas of life:
The main advantage of the hairpin is that, when operating, if the fastened parts decreased in volume, you can tighten the nuts, thereby returning the structures to static strength. High -quality studs covered with zinc are not at all afraid of everyday operation in the open air.
Why is it worth giving preference to stilettos
In order for the mounting element to fulfill its function, it is supplemented with suitable nuts and washers. In some cases, it is allowed to use stabilizing grover. The deeper the thread is used, the more difficult it is to destroy the connection during operation. To other, no less important aspects of application in practice, it is worth adding:
- - one of the fastest ways to install any design;
- - individual studs can be increased between the hundredth without welding;
- - as long as long as long as the service life;
- - allowed to be used in rooms and in the open air;
- - a high threshold of reliability subject to standards.
The market has a fairly large selection of studs. But, only those that comply with the international and European standard are in stable demand. But, where it is impossible to use the hairpin, it can be replaced with knitting wire mir-krepezha.com.ua/rashodnie-materiali/provolka-vyazalnya . This type of expenditure material in classical construction is especially in demand, to fill the foundation
